VC-A70H Firmware(FW) Upgrade 6
7.6 FW start updating. (around 1 min taken)
The Percentage will be increased when it’s running.
7.7 FW upgrade finished.
The button will reverse from grey to black and the camera do the self-check
automatically.
7.8 When firmware upgrade finished, please unplug and reconnect the power cord to
restart the camera.
7.9 Go to the menu, [System]-->[Factory Reset] to reset the camera.
7.10 Go 9. Check the FW version on OSD to confirm if the FW version is correct.
To Next Page
Loading...
