Lumens VC-TR60 User Manual

English-11
1
st
Level
Major Items
2
nd
Level
Minor Items
3
rd
Level
Adjustment Values
Function Descriptions
Saturation
0~C~25
Adjustable when the Image mode is set
to Custom
Sharpness
0~C~11
Adjustable when the Image mode is set
to Custom
Pan Tilt
Zoom
Pan/Tilt Limit
On / Off
Turn on/off the angle limit setting
Pan Right Limit
0~170
Limit the right angle
Pan Left Limit
-170~0
Limit the left angle
Tilt UP Limit
0~90
Limit the upward angle
Tilt Down Limit
-30~0
Limit the downward angle
Pan Flip
On / Off
After it is activated, the Pan command
will be reverse
Tilt Flip
On / Off
After it is activated, the Tilt command
will be reverse
Preset Speed
5 / 25 / 50 / 80 / 120 deg/sec
Set the PTZ rotation speed when
Preset is performed
PTZ Speed Comp
On / Off
Set the Pan/Tilt moving speed to vary
from the zoom position
D-Zoom Mode
Digital Zoom / Sensor Zoom
Set the zoom mode
D-Zoom/Sensor
Zoom Limit
Digital Zoom: x1 ~ x8
Sensor Zoom: x1 ~ x3
Select the zoom mode to set the zoom
limit
D-Effect
Mirror
OFF / Mirror / Flip / Mirror +
Flip
Set the mode at which the image is
turned
Auto Focus
AF Sensitivity
Low / Mid / High
For AF triggering speed, the higher the
speed is, the faster AF is triggered
AF Frame
Center / Full Frame
AF frame setting, when Central was set
as AF frame, focusing will be on the
center of the screen. When Full Frame
was set as AF frame, focusing will be
calculated based on the full screen
Zoom Tracking
On / Off
This function can be set in the Manual
Focus (MF) mode
In Manual Focus mode, check whether
focus is enabled during lens zooming
PTZ Assist
On / Off
This function can only be enabled in the
Manual Focus (MF) mode
When PTZ Assist is enabled and PTZ
control is in operation, the focus will be
triggered. The focus will not be triggered
when the scene changes
Ethernet
DHCP
On / Off
Enable/disable the dynamic host
configuration

Lumens VC-TR60 Specifications

General

Brand	Lumens
Model	VC-TR60
Category	Security Camera
Language	English