Lumex SELECT Series User Manual

LS200-INS-LAB-RevB17
Read this manual before operating your Mattress System.
Save this manual for future use.
The most current version of this manual can be found online at
www.grahameld.com.
SELECT SERIES
LS200 ALTERNATING PRESSURE /
LOW AIR LOSS MATTRESS SYSTEM
USER MANUAL

Lumex SELECT Series Specifications

General

Brand	Lumex
Model	SELECT Series
Category	Medical Equipment
Language	English

Summary

Introduction to the LS200 Mattress System

Contraindications for Using the Mattress System

Lists situations where the mattress system should not be used due to safety risks.

Safety Precautions and Warnings

Significance of Safety Statements

General Safety Warnings

Critical warnings about assembly, component use, modification, and weight capacity.

Patient Safety and System Configuration

Bed Configuration and Patient Exit Safety

Guidance on bed brakes, height, head elevation, frame compatibility, and patient exit.

Fire Hazards and Electrical Safety Measures

Precautions for open flames, smoking, fluid spills, power cord handling, and California warnings.

Setup and Installation of the System

Mattress Installation on Bed Frame

Steps for placing the mattress on the bed frame, ensuring proper positioning and securing straps.

Pump Installation and Power Connection

Operating the Mattress System

Patient Placement and Nursing Care Protocols

General Operation and Skin Care Management

Pump Control Panel Functions

Therapy Modes Explained

Static Function Operation

Alternate Function Cycle

Details the 2:1 alternating function cycle and its timing.

Alarms and Emergency Procedures

Low Pressure Alarm Functionality

Explains the audible alarm for low pressure issues and how to mute it.

CPR Deflation and Reconfiguration Steps

Provides steps for quick mattress deflation and system reconfiguration after CPR.

Care and Maintenance of the System

Cleaning the Mattress and Cover

Pump Cleaning and System Inspection

Troubleshooting Common Issues

Limited Warranty Information