Luminex LumiNode 12 - RJ45 Pin-Out; Terminal Block Pin-Out

Press Apply to save your settings.
MASTER/LIMIT EXPLAINED:
Master:
When choosing the Master option, we con󽘀gure a control channel to act like a grand master. The output is
scaled to each individual channel. (Master value x Channel value / 255)
For example:
Channel 1 = 200
Channel 2 = 229
Channel 3 = 128
If we now reduce the master channel to 204, the channels will output as follows:
Channel 1 = 160
Channel 2 = 183
Channel 3 = 102
Example calculation: Channel 1 = 204 x 200 / 255 = 160
Limit:
When choosing the Limit option, we con󽘀gure a control channel to set a limit to the output. There is no
scaling applied to the channels.
For example:
Channel 1 = 191
Channel 2 = 153
Channel 3 = 128
If we now set the limit channel to be 178, the result will be as follows:
Channel 1 = 178
Channel 2 = 153
Channel 3 = 128
Example calculation: Channel 1 => 191 > 178 => 178
As the result shows, channel 1 has been reduced but channels 2 and 3 have not been a󽗿ected.
STARTUP BUFFER:
From 󽘀rmware 2.4.0, LumiNode o󽗿ers the option to set a startup bu󽗿er. This allows the user to con󽘀gure
values for each channel to be outputted from the LumiNode on bootup until the input source has been
detected. As soon as the 󽘀rst frame from the input source is present on the input, the LumiNode will switch
to the input source.
󾙘
37