DMX PORT STATUS MEANING
DMX Input Green Input idle
Green ashing Input active
DMX only (output mode) Cyan Output idle
Cyan ashing DMX activity
DMX + RDM (output mode) Blue Output idle
Blue ashing DMX activity
Stream loss Red Source stream lost
Red ashing Source stream lost but still outputting the last received packets
Orange ashing Source stream recovered
DMX redundancy Magenta Output idle
Magenta ashing Output active
NETWORK PORT
Left LED (Link) Green Gigabit connection (ashing: Ethernet trac)
Orange 100Mbit connection (ashing: Ethernet trac)
Right LED (Mode) Blue Default colour
Green ashing Device booting
Orange ashing Firmware upgrade in progress
Green blinking Identify in progress
Group colour Corresponding to assigned group/VLAN
There are various LEDs on the LumiNode 12. Here is a list of the LEDs, the possible colours, and the
meaning of each colour:
The LumiNode 12 IP address can be found at the rear of the unit or on the LCD display.
Set your computer with a compliant IP address (do not use the same IP address!).
Connect your computer to the LumiNode with a network cable.
Launch your favourite web browser.
Type the IP address of the LumiNode in the address eld followed by enter.
9
To Next Page
Loading...
