Lumiscope 1133 User Manual

A. Place your elbow on a table so
that the cuff is at the same level
as your heart.
Note: The level of your heart is
slightly below your armpit.
Relax your entire body, especially
the area between your elbow and fingers.
B. If the cuff is not at the same level
as your heart, or if you can not
keep your arm completely still
throughout the reading, use a soft
object such as a folded towel to
support your arm.
C. Turn your palm upwards.
D. Sit upright in a chair, and take
5-6 deep breaths.
Note: Avoid leaning back or crossing
your legs while the measurement is
being taken.(FigC)
Correct Measuring Posture
9
Fig. A
Fig. B
Fig. C
Measurement Procedures
14
Note: It is important to
remain still and quiet
during measurement. Any
significant movement may
affect measurement results.
Pumping Measuring
Results
D. Once the measurements have been displayed, press
the “START/STOP” button to turn off the unit, or it will
automatically shut off after 150 seconds.
C. Quick Read Technology detects your blood pressure
with the touch of a button, which reduces measurement
time significantly and decreases patient discomfort.
Start / Stop

Lumiscope 1133 Specifications

General

Mean arterial pressure	Yes