EasyManua.ls Logo

Lumiscope 1133 - 3 GENERAL; Intended Use; Principle of Operation

Lumiscope 1133
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
What is Blood Pressure?
Blood pressure is the pressure exerted on the artery tube
while blood flows through the arteries. The pressure measured
when the heart contracts and sends blood out of the heart is
systolic (highest) blood pressure. The pressure measured
when the heart dilates with blood flowing back into the heart
iscalleddiastolic(lowest)bloodpressure.
Why Measure Your Blood Pressure?
Among the various health problems afflicting people today,
problems associated with high blood pressure are by far the
most common. High blood pressure's dangerously strong
correlation with cardiovascular disease has made measuring
blood pressure a necessity for identifying those at risk.
About Blood Pressure
4
Message Correction
The pressure measured was lower than
20 mmHg.
Solution: Please measure again.
The pressure measured was higher than
300 mmHg.
Solution: Please measure again.
Pumping error.
Solution: Please check cuff and try
again.
The pressure can not be measured due to
signal noise.
Solution: Please measure again.
The pumping pressure is higher than
300 mmHg.
Solution: Please measure again.
Low battery.
Solution: Check and replace the 4 bat-
teries if necessary.
Troubleshooting
19

Other manuals for Lumiscope 1133

Related product manuals