Lumiscope 1133 User Manual

Introduction
Congratulations on your purchase of the new Lumiscope
Model 1133. This fully automatic blood pressure monitor is
both easy-to-use and ideally suited for daily measurements.
The large display includes systolic blood pressure reading,
diastolic blood pressure reading, and pulse rate, all clearly
shown at the completion of each reading.
You can store up to 85 measurements, ideal for users who
want to monitor and track their blood pressure on a regular
basis. The 1133 is compact and portable, making it perfect for
home use and travel.
Blood pressure measurements determined with your 1133 are
equivalent to those obtained by a trained observer using cuff/
stethoscope auscultation method, within the limits prescribed
by the American National Standard, Electronic or Automated
Sphygmomanometers.
Please read this manual carefully before use. For specific
information on your own blood pressure, contact your physician.
Please be sure to keep this manual.
3
Model: 1133
Display System: Liquid Crystal Display
Power source: 4 "AA" Alkaline batteries
Measurement Method: Oscillometric
Measurement Range: Pressure: 20 ~ 300 mmHg
Pulse: 40 ~ 200 beats/minute
Accuracy: Pressure: ±3 mmHg
Pulse: within ±5% of reading
Inflation: Micro rolling Pump
Pressure Exhaust: Electrical Solenoid Valve
Memory: 85 sets
Low Battery Indicator: Yes
Auto shut-off: 2.5 minutes after last key operation
Battery Life: ~ 250 operations
Operating Environment : 50˚F~104˚F(10˚C~40˚C)<85%RH
StorageEnvironment: -4˚F~122˚F(-10˚C~50˚C)<85%RH
Weight: ~.82lb(375g)withbatteries
Armcircumference: 8.5~14in.(216~356mm)
Dimensions(LxWxH): 5.5x3.9x2.9in.(140x99x74mm)
*Specifications are subject to change without notice.
Specifications
20

Lumiscope 1133 Specifications

General

Mean arterial pressure	Yes