To Next PageTo Next PageHow to protect Lumiscope 1133 from damage?
To prevent damage to your Lumiscope Blood Pressure Monitor from extreme conditions, store it properly. Avoid exposure to high temperatures, direct sunlight, high humidity, and dusty environments.
How to clean Lumiscope Blood Pressure Monitor?
To clean your Lumiscope Blood Pressure Monitor without causing damage, use a cloth moistened with water or a neutral detergent to wipe the unit's body. Afterwards, ensure you wipe it dry.
Why can't I use harsh cleaners on my Lumiscope 1133?
Avoid using thinner, benzene, or other harsh cleaners on your Lumiscope Blood Pressure Monitor, as they can cause damage.
Why is modification of Lumiscope 1133 Blood Pressure Monitor prohibited?
To maintain the integrity of your Lumiscope Blood Pressure Monitor, do not modify or disassemble the unit or the arm cuff.
Why Lumiscope 1133 Blood Pressure Monitor won't turn on?
If your Lumiscope Blood Pressure Monitor isn't displaying anything when you press the power button, there are a few potential causes. First, check that the batteries are installed with the correct polarities. If they are not, install the batteries in the correct position. Second, the batteries may be old and need replacing; try replacing them with new ones. Finally, the battery contacts might be corroded. Clean the battery terminals with a dry cloth to ensure a good connection.
What to do if Lumiscope 1133 reading is too high or low?
If your Lumiscope Blood Pressure Monitor gives an extremely low or high reading, several factors could be the cause. First, make sure that the cuff is wrapped correctly. Second, ensure the cuff is positioned at the same level as your heart and that your posture is correct. Also, avoid straining your arm or hand during measurement; relax during the measurement. Finally, keep quiet and still; avoid talking or moving your arm or hand during measurement.
Why is my pulse rate too high on Lumiscope Blood Pressure Monitor?
If your Lumiscope Blood Pressure Monitor shows a pulse rate that is too low or too high, it could be due to a couple of reasons. Ensure you keep quiet and still during the measurement, avoiding any talking or movement of your arm or hand. Also, if you have just exercised, wait for at least 5 minutes before taking the measurement again, allowing your pulse rate to stabilize.
General| Mean arterial pressure | Yes |
|---|
Important safety warnings and precautions for using the blood pressure monitor.
Identifies and lists all parts of the blood pressure monitor.
Explains the meaning of various symbols found on the device and packaging.
Defines the purpose and target users for the blood pressure monitor.
Explains the oscillometric technology and fuzzy algorithm used for measurement.
Guidance on factors affecting BP and preparation for measurement.
Instructions for inserting, replacing, and caring for batteries.
Details on using the AC power adapter as an alternative power source.
Step-by-step guide to accurately set the date and time on the device.
Detailed instructions on sitting posture and arm placement for accurate readings.
Guide on how to correctly assemble and apply the blood pressure cuff to the arm.
Step-by-step guide on how to perform a blood pressure measurement.
Details on automatic inflation levels and rapid deflation function.
Instructions on how to retrieve past blood pressure readings from memory.
Procedure for clearing stored blood pressure readings from the device's memory.
Explanation of WHO blood pressure classifications and how the device indicates them.
Guidance on common error indications and low battery alerts.
Instructions for cleaning, storing, and responsibly disposing of the device.
Addresses common symptoms and provides corresponding remedies for troubleshooting.
Lists the technical details, ranges, accuracy, and components of the device.
Details the warranty period, coverage, exclusions, and how to obtain service.
Provides blank tables to log blood pressure and pulse readings over time.
