Lumiscope 1133 User Manual

15
5. Thesameprocedurecanbeusedtorecall“M2”measurements.
Deleting the Memory
fig. 11-3
To clear memory: After a measurement is finished or when the device is in standby mode, press
andholdbutton“M1”or“M2”foratleast5seconds.Thedevicewilldisplay“Clr”,whichmeansthe
storedreadingsfor“M1”or“M2”havebeendeleted,asshowninFig.11-3.

Lumiscope 1133 Specifications

General

Mean arterial pressure	Yes