Page 2 of 7
Car Wash Supplies
Clean Towel
Tools Required
Preparation Before Installation
•
Wash the upper rail surfaces of the truck bed.
•
Be sure to completely dry the washed surfaces before installing the tonneau cover.
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
1
1A Make sure there is no dust or debris on the front rail. Turn
cover over, apply supplied foam (Item B) to front rail of
cover (Item A). Flip cover over and place on truck as shown
in step 1B, then proceed to Step 2.
1B Place the cover assembly on the top of the truck bed next to the cab.
A
B
To Next Page
Loading...
