Need help?Do you have a question about the Lunos Nexxt and is the answer not in the manual?
Details on surface and concealed installation of decentralized ventilation devices.
Important safety instructions and warnings for device installation and operation.
Electrical, operational, and environmental specifications for the ventilation device.
Stipulating positions for wall housing and manufacturing the core bore for the breakthrough pipe.
Inserting and fixing the electrical flap close-off and passive transition piece.
Stripping cable insulation and connecting the electrical flap close-off, ensuring waterproof connection.
Guiding mains/control cables, connecting them, and referring to wiring diagrams.
Caution regarding assembly work only with disconnected mains voltage.
Manufacturing the wall cut-out for the wall installation housing.
Inserting and fixing the electrical flap close-off or passive transition piece.
Connecting the electrical flap close-off and applying sealing for waterproofing.
Slitting cable conduit, guiding cables, connecting them, and referencing wiring diagrams.
Inserting the slide-in unit into the wall installation housing, ensuring correct connection.
Crucial safety notes regarding mains voltage and electrical connections.
Diagram showing operation over the element, flap close-off, gesture control, and TAC connections.
Default and recommended DIP switch settings for different Nexxt models.
Detailed steps for removing old filters and inserting new ones, noting flow direction.
Information on fault signals and how to remedy them.
General| Heat recovery | Up to 90% |
|---|---|
| Type | Decentralized ventilation unit with heat recovery |
| Installation | Wall installation |
| Core material | Ceramic |
| Efficiency | Up to 90% |
| Heat Output | Not applicable (ventilation unit) |
To Next Page
