CDA3000 Operation Manual
2-1
1
2
3
4
5
A
DE
EN
FR
IT
ES
FR
2 Mechanical installation
2.1 Notes on operation ..................................................2-1
2.2 Mounting variants ...................................................2-1
2.3 Wall mounting (Wx.x) ..............................................2-2
2.4 Cold plate (Cx.x) ......................................................2-4
2.5 Push-through heat sink (Dx.x) ...............................2-7
2.1 Notes on
operation
Please ensure that ...
• no damp enters the device
• no aggressive or conductive substances are in the immediate vicinity
• no drill chippings, screws or foreign bodies drop into the device
• the vent openings are not covered over.
The device may otherwise be damaged.
2.2 Mounting
variants
Step Action Comment
1
Refer to the name plate to find out the
mounting variant of your inverter module.
The mounting variants differ in
their mode of cooling.
Name plate Mounting and cooling variant
Continued
on
CDA3..., Wx.x
Wall
mounting
Page 2-2
CDA3..., Cx.x Cold plate Page 2-4
CDA3..., Dx.x
Push-through
heat sink
Page 2-7
Table 2.1 Mounting and cooling variants
Wx.x
Cx.x
Dx.x
To Next Page
Loading...
