Lutron Electronics Aurora Z3-1BRL - Troubleshooting and LED Feedback; Two slow blinks after a press; Red LED blinks after a press; Slowly fading in and out

11
Aurora
Troubleshooting and LED Feedback
Two slow blinks after a press
(Not connected/Light is switched off)
Double blink after a press
(Communication failure)
Slowly fading in and out
(Connecting is in progess)
Red LED blinks after a press
(Low battery)
Red LED continuously blinks without using unit
(Unit resetting, replace battery. If issue persists,
contact Lutron Customer Assistance).
Blinks rapidly
(Connecting successful)
2x
2x