Lutron Electronics CD-4318SD - Page 25

1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper text to " USA " or
" EURO".
U
SA
- Use " . " as the Decimal point with default.
E
URO
- Use " , " as the Decimal point with default.
2) After select the upper text to " USA " or " EURO ",
press the " Enter Button " ( 3-8, Fig. 1 ) will save the
setting function with default.
10-6 SD memory card Format
When the lower display show " SD F "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button " (
3-6, Fig. 1 ) to select the upper value to "YES " or
" NO ".
YES - Intend to format the SD memory card
NO - Not execute the SD memory card format
2) If select the upper to " YES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once again, the Display will show text
" Enter SD F " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
10-7 Select the Temp. unit to
℃
℃℃
℃
or
℉
℉℉
℉
When the lower display show " T CF "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper Display text to " C " or
" F ".
23