www.lutron.com/radiora2 Lutron®
|
27
programming shortcuts
saving new levels on previously programmed Keypad buttons
1. Select Keypad button
Press and release the Keypad button to
be programmed. Assigned devices will go to
their preset level.
2. Adjust levels
Use raise, lower, or tapswitch to adjust
the level of assigned devices.
Note: To raise/lower a Wireless
Shade, use a "Shade" Keypad that has
been assigned to that Shade.
3. Save levels
Press and hold the previously
selected Keypad button for 6 to
8 seconds.
LUTRON
To Next Page
Loading...
