Page 16
Sivoia® QS
|
Wiring and Programming Guide
Programming | Restoring Drive Default Settings
Press and hold Close Limit button
until LED flashes Green then turns
on steady.
Press and hold Open Limit button
until LED flashes Green then turns
on steady.
•
Restoring a Drive to factory defaults will reset all keypad assignments but will not affect
the open and closed limits.
13
13.1
13.2
Returning a Drive to its Factory Default Setting
Press and hold CW arrow
button until LED flashes Green
then turns on steady.
13.3
Press and hold CCW arrow
button until LED flashes Green
then turns on steady.
LED flashes a multi-color
sequence, then turns off.
13.4
13.5
H
H
H
H
To Next Page
Loading...
