Page 17
Sivoia® QS
|
Wiring and Programming Guide
14
Programming
| Restoring Keypad Default Settings
Triple tap and hold the top button on the keypad.
DO NOT release the button after the third tap.
Keep the button pressed on the third tap until
the LED next to the top button turns on solid
(approximately 3 seconds).
14.1
14.2
Immediately release the button and triple tap it again.
The LED next to the top button will flash quickly. When
the LED stops flashing, the control has been returned
to Factory Settings.
14.3
T, T, T, H
T, T, T
To Next Page
Loading...
