Lutron Electronics WAC-2019SD - Page 44

12-4 Auto power OFF management
When the " AUTO POWER OFF " text is yellow color
1)
Press "Enter" into the setting function,then use the "
▲
Button
" ( 3-5, Fig. 1 ) or "
▼
Button " ( 3-6, Fig. 1 ) to select the
upper value to " Yes " or " No ".
Yes - Auto Power Off management will enable.
No - Auto Power Off management will disable.
2) After select the upper text to " Yes " or " No ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
12-5 Set beeper sound ON/OFF
When the " BEEPER SOUND " text is yellow color
1)
Press "Enter" into the setting function,then use the "
▲
Button
" ( 3-5, Fig. 1 ) or "
▼
Button " ( 3-6, Fig. 1 ) to select the
upper value to " Yes " or " No ".
Yes- Meter's beep sound will be ON with default.
No - Meter's beep sound will be OFF with default.
is power ON.
2) After select the upper text to " Yes " or " No ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
42