12-12 Set pH manual Temp. compensation value
When the " PH Manual Temp, COMP. " text is yellow color
1) This function only for the pH measurement of
adjusting the pH electrode's manual Temp.compensation
value. The default value is 25 ℃ ( 77 ℉ ).
2)
Press "Enter" into the setting function,then use the "
Button
" ( 3-5, Fig. 1 ) or "
Button " ( 3-6, Fig. 1 ) to select the
upper value to the desired Temp. compensation value (
or
),
then press the " Enter Button " ( 3-8, Fig. 1 ) will save the
setting value with default.
12-13 ESCAPE SETTING
When the " ESCAPE SETTING " text is yellow color
When the Display show the text " ESC ", then press the
" ESC Button " ( 3-3, Fig. 1 ) will finish the Advanced Setting
procedures and return to the normal measuring screen.
Remark :
During execute the " Advanced Setting " function,if press
" ESC Button " ( 3-3, Fig. 1 ) will exit the " Advanced Setting "
function, the LCD will return to normal screen.
46
To Next Page
Loading...
