Before carrying out any cleaning or maintenance work, disconnect the
cooker hood from the mains supply.
– it is switched off at the wall socket and the plug withdrawn, or
– the fuse is withdrawn from the fused spur connection unit, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in countries where this is applicable).
The surfaces and controls are susceptible to scratches and
abrasions. Please observe the following cleaning instructions
All external surfaces and controls can be cleaned w i th warm water and a
little washing-up liquid applied with a well wrung-out soft sponge or
cloth. Wipe the surfaces dry using a soft cloth.
Do not use too much water when cleaning the controls. Water could
penetrate into the electronics and cause damage.
To Next Page
