EasyManua.ls Logo

Luxair STD Series - Warning & Safety Instructions; Correct Usage and Liability; Electrical Safety Requirements

Luxair STD Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 4
This appliance complies with all
relevant legal safety requirements.
Inappropriate use can, however,
lead to personal injury and damage
to property.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important information on the
safety, installation, use and
maintenance of the appliance. Keep
these instructions in a safe
Keep these instructions in a safe
familiar with the contents. Pass them
on to any future owner of the
appliance.
Correct Usage:
This appliance is intended for
domestic use only.
Luxair cannot be held liable for
damage caused by improper
installation or
incorrect use of the
appliance.
We Reserve the right to invalidate any
warranty supplied with this product
following incorrect istallation or
misuse of the appliance, or if used in a
commercial enviroment.
Important:
Before connecting the appliance to the
mains supply, make sure
that the connection details given
on the data plate correspond with the
on-site electricity supply; otherwise
the appliance could get damaged. The
appliance could get damaged Consult a
qualified electrician if in any doubt.
The electrical safety of this appliance
can only be guaranteed when continuity
is complete between the appliance and
an effective earthing
the appliance and an effective earthing
national safety regulations. It is most
important that this basic safety
requirement is present and regularly
tested, and where there is in any doubt,
the household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
Installation, maintenance and
repair work may only be carried out
by a suitably qualified and competent
person in strict accordance with
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorized work.
Warning & Safety Instructions

Related product manuals