1) Unpack the hood and inspect the goods carefully, please
check for any cosmetic damage before installation begins,
Luxair will not accept liability for cosmetic damage after the
hood has been installed, if damage is found then please contact
the retailer from where the goods were purchased.
2) Check that all parts and fixings are packed in the box.
3) Do not remove any of the protective film until installation is
complete, this will
help reduce any accidental damage and help
4) Remove the metal Grease filters immediately after opening
packaging and storein a safe place, they will not be needed until
installation is complete, this will
also ensure against accidental
5) You must use either a ducting kit or charcoal filters with all
Luxair hoods.
6) All filters and ducting kits can be purchased from our website
www.luxairhoods.com
Before Installing Your Hood
To Next Page
Loading...
