EasyManua.ls Logo

Luxair STD Series - Installation Safety Requirements; General Safety Warnings; Installation Distances and Materials

Luxair STD Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 6
Warning & Safety Instructions
To safeguard against
burning, keep children well away from
the lamps at all times.
Packaging e.g. cling film,
polystyrene and plastic wrappings must
be kept out of the reach of babies and
young children. Danger of suffocation.
Dispose of or recycle all packaging
safely
as soon as possible.
Installation:
The distance between the top of
the cooker/hob and the bottom of the
cooker hood canopy must measure at
least
750mm
, unless a greater distance
is specified by Luxair.
If more than one appliance is fitted
beneath the cooker hood, and they have
different minimum safety distances
to the cooker hood, select the greater
distance.
Safety regulations prohibit the fitting of
a cooker hood over solid fuel stoves.
All ducting, pipe work and
fittings must be of non-flammable
material. These can be obtained from the
Luxair web site or from local builders'
merchants.
Note: All porducts MUST be fitted with
a 3amp fuse.
The appliance must not be
connected to a chimney or vent
flue, which is in use. Neither should it
be connected to ducting, which
ventilates rooms with fireplaces.
If exhaust air is to be extracted into a
chimney or ventilation duct no longer
used for other purposes, or using at the
same time as other heating appliances that
depend on the air from the room seek
advice.
.

Related product manuals