9
8. Bi-amp indicator (BI-AMP)
Lights up when the bi-amp output is selected for the output
mode.
9. Balanced phase inversion indicator
(BAL INVERT)
Lights up when the phase of the balanced input and the
balanced output is inverse to the preset setting of this unit.
10. External pre indicator
(EXT PRE)
Lights up when the external pre button is on.
11. Line straight indicator
(LINE STRAIGHT)
Lights up when the line straight button is on.
When the line straight button is set to on, the loudness function
cannot be operated from the supplied remote control.
If this button is pressed, the line straight indicator blinks for
3seconds to let you know these functions cannot be operated.
Turn off the line straight button before operating the loudness
function.
The loudness function can be toggled only from the accessory
remote control (RA-20).
To Next Page
Loading...
Need help?
General
