8
Names and Functions
1. Input display (IN:)
Displays the input terminal selected using the input selector
or remote control.
2. Volume display (VOL:)
The current sound volume level will be displayed in incre-
ments of 0.5 dB.
• “– – – –” indicates the mute state and no sound is
generated.
• The minimum sound volume is –95.5 dB and the maximum
sound volume is 0 dB.
3. Loudness indicator (LOUDNESS)
Lights up when the loudness button on the remote control
is on.
4. Balanced indicator (BAL)
Lights up when the balanced output terminal is selected for
the output mode.
5. Standby indicator (STANDBY)
Lights up when the main power button on the rear panel is
on and the operation button is off.
When the operation button is turned on and the main power
button is turned off, this indicator lights out.
6. Unbalanced indicator (UNBAL)
Lights up when the unbalanced output terminal is selected
for the output mode.
7. Remote control infrared receiver (R)
Receives signals from the accessory remote control.
Display window
To Next Page
Loading...
Need help?
General
