EasyManua.ls Logo

Luxman E-250 - Specifications

Luxman E-250
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PHONO AMPLIFIER E-250
11
Specifications
Input sensitivity MM : 3.2 mV/250 mV, 1 kHz, load 50 kΩ
MC-HIGH : 0.37 mV/250 mV, 1 kHz, load 50 kΩ
MC-LOW : 0.12 mV/250 mV, 1 kHz, load 50 kΩ
Input impedance MM : 34 kΩ/47 kΩ/56 kΩ/100 kΩ (switch selection)
MC-HIGH : 40 Ω
MC-LOW : 2.5 Ω
Gain MM : 38 dB
MC-HIGH : 57 dB
MC-LOW : 66 dB
RIAA deviation MM : 20 - 20 kHz±0.3 dB
MC-HIGH : 20 - 20 kHz±0.5 dB
MC-LOW : 20 - 20 kHz±0.5 dB
Maximum allowable input voltage MM : 120 mV
MC-HIGH : 15 mV
MC-LOW : 5 mV
Output impedance 300Ω
S/N ratio (at 250 mV output) MM : 90 dB (IHF-A)
MC-HIGH : 83 dB (IHF-A)
MC-LOW : 80 dB (IHF-A)
Total harmonic distortion (at MM 1 V output) 0.003%
Channel separation (10kHz) 91dB or more
Accessories • Power cable
• Owner's Manual (This document)
• Safety cautions
Circuiting system NF type equalizer amplifier equipped with MC step-up transformer
Power consumption 7 W
Power supply
230 V 〜 (50 Hz)
Max. external dimensions 364 (W) x 81 (H) x 274 (D) mm
(front side knob of 6mm and rear side terminal of 11 mm included in
depth)
Weight 4.3 kg (main unit only)
* Specifications and the appearance are subject to change without notice.