2
Features of This Unit
Outline
This unit is an NF type phono equalizer amplifier supporting
MM/MC cartridges.
Specially selected MC transformer
Two pieces of step-up transformers in which a super permal-
loy core is independently used are mounted. Independence
between left and right channels has achieved richly expres-
sive sound that can be produced only by boosting with a
transformer.
Setting of cartridge load impedance
The load resistance setting function with 4 positions supports
a wide variety of cartridges.
Setting of cartridge load capacity
The load capacity setting function with 4 positions supports
a wide variety of cartridges. Change in high-frequency char-
acteristics allows sound to be adjusted to your favorite tone
quality.
Improvement in S/N ratio
Noise reduction has been achieved by the 2-parallized first
stage of FET, and improvement in the S/N ratio has been
achieved by optimization of ground pattern and ground point.
Selector relays
The selector relays of the high sound quality which are
mounted in the important points of LUXMAN amplifiers also
are mounted.
High-inertia power supply
The high-inertia power supply circuit on which a large-capac-
ity capacitor blocks were combined.
Schottky barrier diode
Schottky barrier diodes that have less switching noises and
higher conversion efficiency to the DC voltage is applied for
the power supply rectifier circuit.
To Next Page
Loading...
Need help?
General
