Lynx Forest Fox Syncro - Service of COMET-pulley; Ski Runners; Changing a new ski runner; SLIDE RAIL ADJUSTMENT

38 _____________________________________________ OPERATORS MANUAL
ENGLISH
TRA-clutch
Position 1 (not numbered).
Loosen just enough to permit rotating
of calibrate screw.
Calibration screw has a notch on top
of its head.
Service of COMET-pulley
 Clean the shaft of the clutch (the visible part), the shafts of the weight levers and
counter rolls in periods of 500 km. Lubricate with dry grease (chain spary). Contact
authorized service shop when needed. See the picture