• Frequency response 20-40kHz ± 1 dB.
• Signal to noise–108 dB
• Dynamic range: 108 dB (A-weighted)
• THD + N: 0.00281% @ 0 dBFS
Default settings:
1) All mixer faders set to zero dBfs
2) All output faders attenuated by 6 dB
3) Routing for return channels: rt 1/2 to: output 1/2, rtn 3/4 to: ouput 3/4, etc. spdif rtn to: spdif. Phones routed to output 1/2
4) All AUX sends full attenuation.
5) Analog In and spdif In - no routing assignment
6) All pans hard left and right
7) All balance knobs center
8) All channels un-muted, un-soloed, un-linked
9) Level controller assignment will be assigned to all individual channels per group.
10) Assignment of level controller is “output bus”
11) All output channels assigned to “main”
14. Product Specs
28
To Next Page
Loading...
