23 SolsTiS User Manual v10.0
User accounts can access key, commonly needed control pages only:
User 1 name: user1
User 1 password: user1
User 2 name: user2
User 2 password: user2
User 3 name: user3
User 3 password: user3
4.6 Initial Internal Optical Alignment
There is no initial internal optical alignment procedure to be performed for the
SolsTiS laser system due to the use of M Squared Lasers’ proprietary
InvarianT™ alignment-free opto-mechanical mounts used throughout. The
SolsTiS laser head is a sealed design that must never be opened. (Opening
the laser head may expose the user to safety hazards, result in damage, and
will void your warranty.) When the installation procedure has been completed
and the system is ready for activation, please refer to Chapter 5 – Operation.
To Next Page
Loading...