8102 secivreSM2M © 19
RControl Mobile Application
The RControl mobile application is available for Android, iOS and Windows Phones.
With the RControl mobile application the end user can:
• Monitor the status of the alarm panel
• View events log up to one year back in time
• Remotely Arm/Disarm the alarm system
The application can be download by scanning the following QR codes:
Initial end user login credentials for the app are provided with the alarm panel.
At the
rst login, it is strongly recommended that the end user changes the User name and Password and
provides an email for password recovery.
Remote Arming/Disarming via the RControl Application
To enable the remote control via the mobile application, go to Menu > Settings > Remote
Arming/Disarming and enable the Arming/Disarming feature.
Ask the end user to enter a Remote PIN code of their choice and Disarm (or Arm) the system from a
keyfob or the keypad within 2 minutes to complete the initial pairing procedure.
Changing the default keypad user code
The end user can change his keypad user code from the mobile application.
To change the code go to Menu > Settings > Remote Arming/Disarming > Change Remote PIN.
To Next Page
Loading...
Need help?
General