EasyManua.ls Logo

Mac allister MCSWP40 - Page 23

Mac allister MCSWP40
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
MCSWP40 by MacAllister
GB
IE
Getting Started...
Before you start
NOTE: Never mix fuel and oil directly in the tank of the
product.
> Unscrew and remove the fuel tank
cap (29).
> Fill correctly mixed fuel/oil into the
tank using a fuel funnel tted with a
lter to avoid debris entering the tank.
Do not overll. Leave a minimum 5
mm of space between the top of the
fuel and the inside edge of the tank
to allow for expansion (Fig. 14).
> Avoid spilling and overlling the
tank.
> Wipe up spilled fuel with a soft cloth and ret the fuel tank cap
(29). Use the combination spanner (32) to tighten the cap (29)
properly (Fig. 15).
> Always dispose of fuel, used oil and soiled objects according to local
regulations (see section “Recycling and disposal”).
40 : 1
NOTE: Fuel and oil deteriorate over time. It may be
difcult to start the engine if you use fuel which has
been kept for more than 30 days. Towards the end of
the season, it is advisable to put only as much fuel
in the tank as you need for each use, since it should
be completely used up before storing the product.
Empty remaining fuel from the tank when storing the
product for over 30 days.
5 mm
Fig. 14
Fig. 15
Fig. 15

Related product manuals