Mac allister MCSWP40 - Fuel and Oil Preparation

GB
IE
MCSWP40 by MacAllister
22
Getting Started...
Before you start
Fuel and engine oil
40 : 1
WARNING! This product is not supplied with fuel-oil
mixture in the engine! Before operating this product
it is essential to ll it with fuel-oil mixture!
This product is equipped with a 2-stroke engine, the fuel and oil
tank are combined and it is essential to ll a fuel-oil mixture before
operating this product. Observe the technical specications for
suitable fuel and engine oil.
WARNING! Fuel and oil are highly inammable! Fumes
will explode if lit! Ensure that there are no naked ames
around the product! Do not smoke while lling fuel and oil!
> Place the product on a stable, level surface. We recommend laying
a non-ammable sheet under the product.
> Mix a regular-grade unleaded petrol and a quality engine oil for air
cooled 2 stroke engines in a suitable container (Fig. 13).
> Use an anti-oxidant added quality oil expressly labelled for air-
cooled 2 stroke engine use (JASO FC GRADE OIL or ISO EGC
GRADE).
> Do not use BIA or TWC (2 stroke water-cooling type) mixed oil
> The recommended mixing ratio for petrol:oil is 40:1.
Fig. 13
40 : 1