Mac allister MCSWP40 - Vibration and Noise Reduction; Emergency

09
MCSWP40 by MacAllister
GB
IE
Getting Started...
Technical and legal information
upon the safety devices built into your saw. As a chain saw user,
you should take several steps to keep your cutting jobs free from
accident or injury.
Kickback is the result of tool misuse and/or incorrect operating
procedures or conditions and can be avoided by taking proper
precautions as given below:
> Maintain a rmgrip, with thumbs and ngers encircling the
chain saw handles, with both hands on the saw and position
your body and arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator, if proper
precautions are taken. Do not let go of the chain saw.
> Do not overreach and do not cut above shoulder height. This
helps prevent unintended tip contact and enables better control
of the chain saw in unexpected situations.
> Only use replacement bars and chains specied by the
manufacturer. Incorrect replacement bars and chains may
cause chain breakage and/or kickback.
> Follow the manufacturer’s sharpening and maintenance
instructions for the saw chain. Decreasing the depth gauge
height can lead to increased kickback.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time
of operation, use low-vibration and low-noise operating modes as
well as wear personal protective equipment.
Take the following points into account to minimize the vibration and
noise exposure risks:
> Only use the product as intended by its design and these
instructions.
> Ensure that the product is in good condition and well maintained.
> Use correct application tools for the product and ensure they are
in good condition.
> Keep tight grip on the handles/grip surface.
> Maintain this product in accordance with these instructions and
keep it well lubricated (where appropriate).
> Plan your work schedule to spread any high vibration tool use
across a number of days.
Emergency
Familiarise yourself with the use of this product by means of
this instruction manual. Memorise the safety directions and
follow them to the letter. This will help to prevent risks and
hazards.