Mac allister MCSWP40 - Air Filter; Cylinder Fins

MCSWP40 by MacAllister
48
Care and maintenance
GB
IE
In more detail...
Air lter
Inspect the air lter (14) regularly. Replace it with a new one if
necessary.
> Loosen the xing screw (12) and remove the air lter cover (13)
(Figs. 53, 54).
> Remove the air lter (14) (Fig. 55) and split it into its two halves.
> Brush petrol into the mesh to remove the dirt. Reassemble the
air lter (14), pressing on the rims until they ‘click together.
> Attach the air lter cover (13) and secure it with the screw (12).
Cylinder ns
> Dust clogging between the
cylinder ns (16) will cause
overheating of the engine.
Periodically check and clean
the cylinder ns (16) with air
jet. (Fig. 56).
12
13
14
16
Fig. 56
Fig. 53 Fig. 54 Fig. 55