42
TROUBLESHOOTING
SYMPTOM
PROBLEM
SOLUTION
REF.
Sickle drive motor vibrates.
Improper hydraulic flow.
Reduce or increase oil
flow/PTO rpm until vibration
stops. Flow should be 25
gpm.
31
Float cannot be adjusted to
heavy enough setting.
Light header.
Remove inner coil springs
from float.
32
Tires running over crop.
Tractor wheels
improperly set.
Adjust wheels.
*
For TV140 Tractor: Install 4”
wheel spacers (supplied by
New Holland).
6
Crop fanning out
excessively.
Adjust header opening.
*
Install windrow forming rods
(970 Series Header only).
*
* - See Tractor or Header Operator’s Manual.
To Next Page
Loading...
