MacDon A30-D - Page 42

UNLOADING AND ASSEMBLY
Form 169078 Revision C
42
LUBRICATE THE HEADER (Cont’d)
DRIVELINES
DRIVELINE UNIVERSALS (2 PLCS)
A30-S
CROSS SHAFT (1 PLC)
CROSS SHAFT (1 PLC)
DRIVELINE UNIVERSALS (2 PLCS)
DRIVELINE UNIVERSALS (2 PLCS)
DRIVELINE SHAFTS (1 PLC)
DRIVELINE UNIVERSALS (2 PLCS)
DRIVELINE SHAFTS (2 PLCS)
A30-D and A40-D
10% MOLY GREASE IS RECOMMENDED FOR
DRIVELINE SHAFT SLIP JOINTS ONLY
10% MOLY GREASE IS RECOMMENDED
FOR DRIVELINE SHAFT SLIP JOINTS ONLY
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base