CAB DISPLAY MODULE (CDM)
4. Press right (C) arrow select YES. Press SELECT (D).
• DISPLAY LANGUAGE? is displayed on the
upper line.
• Default languag e is displayed on the lower line.
5. Press left (B) or right (C) arrow to select
preferred language.
NOTE:
English, Russian, and Spanish language options
are available on windrowers. Not all language
options are available on all windrowers.
6. Press PROGRAM (A) to ex it Programming Mode or
press SELECT (D) to proceed to next CAB DISPLAY
SETUP? action.
Figure 4.9
: M105 Display Language
Figure
4.10: M155 Display Language
Figure 4.11: M205 CDM Programming Buttons
147962 159 Revision A
To Next Page
Loading...
