18
2. Recording operation
The default recording mode after the starting of DVR is 24 continuous recording. User can choose the suitable recording mode
due to the necessity. Instructions for the different recording modes as following:
a) Schedule recording
Enter the menu, and set the timing period for the recording. See details at Menu>System setting>Schedule
b) Hand recording
Press “Record” button on the remote controller or “Record” on the front panel
Check the status of each channel in the recording menu; Shadowed channel is the recording channel.
To the channel necessary to be recorded, please press the related number key to shadow it. Then press Enter to begin the
recording.
Press again the related number key to stop the recording of this channel
Press Cancel or ESC to return
c) Alarm recording
Connect the alarm input according to the device connection and the instructions
Made the related setting in the menu to start Alarm recording. See details at Menu>System setting>Alarm setting
d) Motion detection recording
Record the channel only in need of motion detection. First confirm whether this channel is at timing recording; if it is, please
close timing recording.
Made the related setting in the menu to start Motion detection recording，See details at Menu>System setting>Motion detection
To Next Page
Loading...