29
RECORD SEARCH
CH 1
DATE 2002-12-08
TIME 08:18AM
PLAY START
*All the below settings of the menu must be saved before taking effect.*
The menu for record search is pictured at the right.
First set the channel#, then date and time you want to search,
then select START, the playback begins.
First set the channel #, date and time you want to search,
then select SEARCH, the screen shows the 8 recording files
following the searching time. Use pq to select the file to be
played. Press ENTER to begin the playback.
Note the letters before the record are equal to following
R— Record M— Motion Detection A—Alarm
First set the search date, then select START, all the alarm records will
be displayed. Press pq to select the record. Press ENTER to play the
alarm record. Note: motion detection alarm can not be searched in
this category, but can be
searched in RECORD and LIST.
List
Alarm
LIST SEARCH
CH 1
DATE 2002-12-08
TIME 10:10AM
LIST SEARCH
ALARM SEARCH
DATE 2002-12-08
SEARCH START
RECORD SEARCH
To Next Page
Loading...