10 Modify the NET.CFG file.
A sample modified file is shown below. Note the addition of the Protocol
statements in the Link Driver section and the addition of the Protocol TCP/IP
section. The frame types and IP addresses used in your environment may be
different from this example.
Link Driver MACODI
Protocol IPX E0 ETHERNET_802.2
Frame ETHERNET_802.2
Frame Ethernet_II
; Frame Ethernet_802.3
; Frame Ethernet_SNAP
Protocol RARP 8035 ethernet_ii
Protocol ARP 806 ethernet_ii
Protocol IP 800 ethernet_ii
PORT 300
INT 10
; node address 12d43
NetWare DOS Requester
FIRST NETWORK DRIVE = F
Protocol TCPIP
ip_router 17.131.1.0
ip_netmask 255.0.0.0
ip_address 17.131.0.14
PATH LANG_CFG C:\NET\LANG
PATH SCRIPT C:\NET\SCRIPT
PATH PROFILE C:\NET\PROFILE
PATH LWP_CFG C:\NET\HSTACC
PATH TCP_CFG C:\NET\TCP
Link Support
Buffers 4 1500
MemPool 4096
161
Installing Network Management Software
To Next Page
Loading...