Connecting other equipment
If you are new to the Macintosh, it’s a good idea to get some experience using
your computer before you connect other equipment, such as a printer or
scanner. To learn basic Macintosh skills, continue with the instructions in
this chapter.
When you’re ready to connect other equipment to your Macintosh, see the
instructions in Chapter 3.
Turning the computer on
Follow these steps to turn the computer on:
1 Turn on the monitor.
See the information that came with your monitor for the location of the
power button.
2 Turn on your computer by pressing the Power key.
The Power key is at the top of the keyboard. You can recognize this key by the
triangle outline on it (P).
You hear a tone from the computer as it starts up.
8
Chapter 1
To Next Page
Loading...