11 Add the sums from steps 9 and 10.
The resulting sum is the size that the new container should be.
12 Press
x
-Return to switch back to the Mac OS.
Creating the new container
Now that you know what size the container should be, you’re ready to
create it.
1 Follow the instructions in “Configuring Drives C and D” earlier in this chapter to create a
new container for drive D.
You may need to remove some files from your hard disk to free enough space
for the new container.
2Click Restart PC at the bottom of the PC Setup control panel.
3Click Switch to PC.
You now have two drives available—drive C, your original container, and
drive D, the container you just created.
Moving the files
You can transfer your files from the old container to the new one in either the
Mac OS or the PC environment.
m
To move files in the Mac OS, drag all the files from the existing drive container to
the new one.
To move th e files in the PC environment, follow these steps:
1At the DOS prompt, type
FORMAT D: /S
and press Return.
This command makes the new drive container bootable.
Typ e Y when DOS asks if you’re sure.
2When the DOS prompt returns, type the following command:
XCOPY C:\*.* D:\*.* /E /V
This command copies all the files and directories from your drive C container
to your drive D container.
76
Chapter 6
To Next Page
Loading...