Page 5-42
200 BENCH PROCEDURES
Cylinder Head Pipe Plugs
CYLINDER HEAD PIPE PLUG INSTALLATION
1. Apply dry pipe thread sealant to pipe plug
and pipe plug bore in head.
Refer to Figure 5-55.
2. Install a 1/8-inch pipe plug in top of rear
cylinder head.
3. Install two 3/4-inch core hole pipe plugs in
cylinder head. Torque to 28 lb-ft (38 N•m).
Figure 5-55 — Cylinder Head Pipe Plug Locations
1. 1-1/16 inch cup plug
2. 3/4-inch NPT plug
3. 13/16-inch cup plug
4. 1/16-inch NPT plug
5. 1/8-inch NPT plug
5-101.bk Page 42 Friday, March 17, 2006 11:05 AM
To Next Page
Loading...
