200 ENGINE ASSEMBLY
Page 6-43
Installation
Refer to Figure 6-51.
1. Position the oil pump (1) on the cylinder
block (3).
2. Secure the pump in position using the
mounting capscrews (2). Torque the
mounting capscrews to 40 lb-ft (54 N폷m)
using torque wrench J 24407 or equivalent.
Figure 6-51 — Oil Pump Installation
200653a
2
1
3
2
2
1. Lubrication oil pump
2. Mounting capscrews
3. Cylinder block
5-101.bk Page 43 Friday, March 17, 2006 11:05 AM
To Next Page
Loading...
