Page 4-6
200 ENGINE DISASSEMBLY
Figure 4-5 — Viscous Fan Drive Assembly Storage
[231 PB] FUEL FILTER
ADAPTER ASSEMBLY
Refer to Figure 4-6
1. Disconnect three fuel lines from fittings (2, 3
and 5) on fuel filter adapter assembly (1).
Tag and cap all lines.
2. Remove three capscrews (4) from the top of
the fuel filter adapter assembly.
3. Remove fuel filter adapter assembly from
the air inlet manifold (7).
Figure 4-6 — Fuel Filter Adapter Assembly Removal
1. Fuel filter adapter
assembly
2. Secondary filter fitting
(out)
3. Secondary filter fitting
(in)
4. Capscrews
5. Primary filter fitting (out)
6. Primary filter fitting (in)
7. Air inlet manifold
8. Mounting flange
5-101.bk Page 6 Friday, March 17, 2006 11:05 AM
To Next Page
Loading...
