Page 4-18
200 ENGINE DISASSEMBLY
Refer to Figure 4-21.
1. Remove three mounting capscrews (5)
securing air compressor (1) to auxiliary
driveshaft housing (3).
2. Taking care not to damage or lose the
lubrication oil supply tube (2), remove the air
compressor by pulling it rearward out of the
mounting flange. Discard gasket.
Figure 4-21 — Air Compressor Removal
200360a
1
2
3
4
5
1. Air compressor
2. Oil supply tube
3. Auxiliary driveshaft
4. Oil drain openings
5. Capscrew
5-101.bk Page 18 Friday, March 17, 2006 11:05 AM
To Next Page
Loading...
