Page 11 of 31
Illustration
Industrial Pulse Cap Output Type (MXD-xCx-xx) WIRING INSTRUCTIONS
Cable Specifications for Standard/Industrial Pulse Cap
Minimal cable specification recommended for wire:
5 core, 24 AWG each
drain wire AND shielding/ copper braiding
Temperature rating: -20 - 80 °C
Voltage rating: 300 V
- Maximum cable length should not exceed 60 metres.
- If cable is extended and/or longer than 10m, it is highly recommended to use 24V power supply for Hall
Switch and reed switch.
PCB
* MXD-xCx-HH generate Quadrature Pulse Output
- Industrial Pulse Cap Temperature (-25 °C -120 °C)
- IP 67
Industrial Pulse Cap is fixed to the flow meter and
does not incorporate M-lock feature. It comes with
Conduit Entry to facilitate customers for own wiring.
To Next Page
Loading...
