To Next Page

To Previous Page

26 Configuration and Operation

Controller 30 Operation Manual 90-30016-00 Rev A-01 Date: 031920

Schedules Screen

Tapping the Schedules button will bring you to the schedules screen. This screen allows you to

set a schedule for fans or groups to run and stop automatically.

1 Schedules - Allows you to select an existing schedule or create a new schedule when “Add

New Task” is selected.

2 Name - Names the schedule (required).

3 Active/Inactive - Enables or disables the schedule.

4 Sun-Sat - Selects which days to run the schedule. Red X’s indicate days where the schedule

is not in effect .

5 Start - Specifies time of day when the fans will run.

6 End - Specifies time of day when the fans will stop running.

7 AirEffect (Optional) - Runs fans according to AirEffect during the schedule.

8 Drop Menu - Allows you to select a fan or group. If AirEffect is selected, zones are

displayed instead.

9 Speed - Specifies the speed the fans will run. If AirEffect is selected, this field is ignored.

10 Direction - Specifies the direction the fans will run. If AirEffect is selected, this field is

ignored.

11 Accept - Save Changes.

12 Cancel - Cancel Changes.

Edit Schedule - Allows you to edit a selected existing schedule (visible when a schedule is

selected).

Delete Schedule - Allows you to delete a selected existing schedule (visible when a schedule

is selected).

MacroAir Technologies Controller 30 User Manual

Questions and Answers: